Cleaning Methods For Window Treatments

By Arthur Lee


Window treatments are elements used for interior decorations, most often in homes from Fairfield County CT and these are being utilized for windows, either placed over, around, in, or on it. Usually, these have the purpose of installing elements for an enhancement in room aesthetic and window aesthetic. There are many styles of these which are available for installation and the types depend on the location of installment.

Aside from its use as a decoration, it can also protect the furniture, accessories, and the flooring to be damaged because of the excessive heat of sunlight. The formation of the dust and dirt is possible and this usually results to having allergies and even respiratory issues to homeowners. Removing the allergens can be done through these simple Fairfield County CT window treatments methods for cleaning.

Cleaning drapes and as well curtains. Be sure that you can be able to read and understand the label. Through this, you can know the proper ways on washing it by following the instructions carefully. Take note on the specifications like not using a washing machine when the instructions stated to hand wash.

Removal of particle of dusts from fabric treatments. One very useful tool for this is by the utilization of vacuum cleaners and be sure to set the lowest setting for the suction. For some spots, smudges, and stains, make use of a baby powder. Apply it into a toothbrush then scrub it to the dirt in a gentle manner.

Also, when fabrics are being dried, be sure that the instructions in label are followed properly before you are going to place it inside a dryer. If it is stated in the label that drying would be fine, your dryer must be set to low heat or to cool setting. For avoiding the materials to shrink, while still damp, remove it out from a dryer.

Second is to clean the blinds. Start on removing the dust from blinds. You may take it out from the window, close it, then lay it flat on the floor or just on the window. Starting from the top, vacuum it with the brush attachment or the handheld vacuum. You may also use a feather duster or a soft cloth for removing the dust. Turn it into its opposite direction then repeat the method.

For vinyl blinds and plastic blinds, use the all purpose cleaner, position the material and spray it. A sponge may be used as well for wiping the cleaner directly or a garden hose for the water. Soaking it in a bathtub with water and liquid soap is also fine. For the wood blinds, a good recommendation is using a surface cleaner produced for a wood. Avoid pouring much amount of the cleaner to avoid warping of wood.

Shades cleaning. Use also a vacuum cleaner in performing the method and it must be set to the lowest suction setting. Similar to other methods, read and understand the instructions carefully. Typically, fabrics are dry cleaned. So never make use of water solutions when dry cleaning is specified.

Plastic treatments or shades are required to be wiped using a clean cloth and this is should be dipped into the water mixed with liquid soap. For removing stains and spots, get an all purpose cleaner, spray it to the treatment then gently do the scrubbing. Lastly, mix the liquid soap with water and use it for honeycomb shades to be cleaned. Blot the stains or spots directly on the material. Avoid rubbing to prevent the texture from damages.




About the Author: